Compare commits

..
Author SHA1 Message Date
王野 d86e9eab9c release: bump chart version to v1.0.91 2026-11-10 14:52:07 +08:00
王野 88ebfd30e1 fix(helm): start PostgreSQL without gosu on K3s 2026-11-10 14:52:07 +08:00
drone 60356c55aa release: bump chart version to v1.0.90 2026-11-03 02:07:13 +00:00
drone 68bccfc092 release: bump chart version to v1.0.89 2026-11-03 01:54:41 +00:00
薛佳帆 e031d656a0 release: bump chart version to v1.0.88 2026-10-30 03:45:53 +00:00
薛佳帆 347180d77b release: bump chart version to v1.0.87 2026-10-30 03:42:15 +00:00
王野 9fdb306601 release: bump chart version to v1.0.86 2026-10-28 07:40:28 +00:00
王野 c3e295494d release: bump chart version to v1.0.85 2026-10-28 02:22:28 +00:00
liulingyun 17a186a9df merge: origin/master(v1.0.84) → master(errorRetentionMonths 同步主线) 2026-10-27 14:32:48 +08:00
薛佳帆 321b602905 release: bump chart version to v1.0.84 2026-10-27 06:24:59 +00:00
liulingyun a1da3f4e42 feat(audit): audit chart 新增 errorRetentionMonths——错误流水独立保留期透传
(openspec 变更 edge-agent-error-audit-retention;配套后端 AUDIT_ERROR_RETENTION_MONTHS)

- values.yaml: audit.errorRetentionMonths 默认 3(操作流水 retentionMonths=6 不变)
- templates/audit.yaml: deployment 透传 AUDIT_ERROR_RETENTION_MONTHS

注: 版本号 bump 随发布流程另行执行。
2026-10-26 15:39:36 +08:00
薛佳帆 8733595824 release: bump chart version to v1.0.83 2026-10-26 05:29:55 +00:00
薛佳帆 ff5ecf710e release: bump chart version to v1.0.82 2026-10-23 01:18:36 +00:00
薛佳帆 c2b78f8ff0 release: bump chart version to v1.0.81 2026-10-23 01:17:47 +00:00
薛佳帆 b0e1dcd4f0 release: bump chart version to v1.0.80 2026-10-23 00:57:04 +00:00
薛佳帆 e7f4b71cd0 release: bump chart version to v1.0.79 2026-10-22 05:10:33 +00:00
薛佳帆 4bcf4fe0a3 release: bump chart version to v1.0.78 2026-10-22 02:44:25 +00:00
薛佳帆 33de837556 release: bump chart version to v1.0.77 2026-10-22 01:36:57 +00:00
薛佳帆 b1d65fab30 release: bump chart version to v1.0.76 2026-10-22 01:35:03 +00:00
王野 25a9385751 release: bump chart version to v1.0.75 2026-10-16 09:00:53 +00:00
王野 0c8effe321 release: bump chart version to v1.0.74 2026-10-16 06:44:35 +00:00
ximenchuifeng 0aeb301be5 release: bump chart version to v1.0.73 2026-10-14 08:51:32 +00:00
ximenchuifeng 2892f80bd1 release: bump chart version to v1.0.72 2026-10-14 08:07:35 +00:00
ximenchuifeng 2b3bcbcfa8 release: bump chart version to v1.0.71 2026-10-14 04:58:12 +00:00
ximenchuifeng cd3635643b release: bump chart version to v1.0.70 2026-10-13 08:09:51 +00:00
ximenchuifeng 326236b5e6 release: bump chart version to v1.0.69 2026-10-13 08:09:09 +00:00
薛佳帆 133c032144 release: bump chart version to v1.0.68 2026-10-13 05:46:43 +00:00
ximenchuifeng 373c020fc4 release: bump chart version to v1.0.67 2026-10-12 07:25:11 +00:00
ximenchuifeng 5d54a3ef92 release: bump chart version to v1.0.66 2026-10-12 05:16:20 +00:00
ximenchuifeng ff458a86be release: bump chart version to v1.0.65 2026-10-12 02:13:08 +00:00
王野 3345c257c4 release: bump chart version to v1.0.64 2026-10-11 08:49:15 +00:00
ximenchuifeng 869cc95c8b release: bump chart version to v1.0.63 2026-10-11 08:39:48 +00:00
ximenchuifeng 58ae4560a7 release: bump chart version to v1.0.62 2026-10-11 07:22:08 +00:00
ximenchuifeng 6dd26e9549 release: bump chart version to v1.0.61(含 ADS Router 显式身份参数) 2026-10-11 14:49:03 +08:00
ximenchuifeng c39195c610 feat(edge-unit): ADS Router 部署参数——显式身份注入+缺身份渲染拒绝
adsRouter values 块:enabled 缺省 true(每 Edge 出厂自带本地 Router);localNetId/
publicAddress 必填(启用时)——缺任一即 {{ fail }} 拒绝渲染,不用共同默认身份兜底
(身份必须显式分配且重启保持,绝不运行时从 Pod IP 推导);clientEndPoint/externalPort
可选(缺省 127.0.0.1:48898/48898,Pod 独立网络命名空间自洽)。unit.yaml 注入
Ads__Router__* env(ClientEndPoint/ExternalPort 空则省略)。README 补值文档与示例。
渲染证据:demo 两实例(不同 NetId/正确 publicAddress)exit=0+缺身份负例 fail+enabled=false
零 Ads env;见 hub docs/research/evidence/2026-10-10-ads-router-impl/W9-*.md
2026-10-11 14:48:55 +08:00
ximenchuifeng 52622e8fea release: bump chart version to v1.0.60 2026-10-10 07:12:20 +00:00
24 changed files with 205 additions and 27 deletions

No files matched your search

+16
View File
@@ -35,6 +35,22 @@ helm template ci-edge release-charts/mixingx-edge-unit
`mixingx-deploy` 的 ApplicationSet 按 unit chart 逐个发布,每个 edge/agent 一个独立 Helm release。详见 `mixingx-deploy/`。
## PostgreSQL on K3s
PostgreSQL StatefulSets use the Debian image's UID/GID 999 and run the image
entrypoint directly. This skips gosu while preserving database initialization
and startup on the existing data volume. The readiness probe uses
`pg_isready` over TCP so the container is Ready only after PostgreSQL accepts
connections, including after recovery.
Only the PostgreSQL container uses `privileged: true` as a temporary workaround
for checkpoint signal failures observed on affected Ubuntu 26.04 / K3s nodes.
The namespace's admission policy must permit privileged containers. The
[containerd signal-denial report](https://github.com/containerd/containerd/issues/14485)
describes the same checkpoint error with AppArmor. Check the host kernel log
for an AppArmor signal denial and validate initialization and recovery with the
corrected runtime or profile before removing privileged mode.
## 关联文档
- hub [AGENTS.md](https://gitee.com/mixing-tech/mixingx.hub) — 全项目指南
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-agent-unit
description: "One MixingX agent unit release: agent backend, agent web, and agent PostgreSQL."
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -207,6 +207,11 @@ spec:
labels:
app.kubernetes.io/component: {{ $name }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-unit.followerScheduling" . | nindent 6 }}
{{- with $.Values.imagePullSecrets }}
imagePullSecrets:
@@ -216,6 +221,10 @@ spec:
- name: postgres
image: {{ .Values.images.postgres.repository }}:{{ .Values.images.postgres.tag | default "latest" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ .Values.sharedInfra.postgres.password }}"
@@ -229,6 +238,15 @@ spec:
- name: tcp
containerPort: {{ .Values.ports.postgres }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ .Values.ports.postgres }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-audit
description: MixingX audit service.
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -31,6 +31,11 @@ spec:
labels:
app.kubernetes.io/component: {{ .Values.audit.database }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-audit.tierAffinity" (dict "role" "audit" "root" $root) | nindent 6 }}
{{- with $.Values.imagePullSecrets }}
imagePullSecrets:
@@ -40,6 +45,10 @@ spec:
- name: postgres
image: {{ $root.Values.sharedInfra.postgres.image | default "docker.io/library/postgres:17" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ $root.Values.sharedInfra.postgres.password }}"
@@ -53,6 +62,15 @@ spec:
- name: tcp
containerPort: {{ $root.Values.sharedInfra.postgres.port }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ $root.Values.sharedInfra.postgres.port }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data
@@ -46,9 +46,12 @@ spec:
key: AUDIT_PG_URI
- name: AUDIT_PG_TIMEZONE
value: "{{ $root.Values.timezone | default "Asia/Shanghai" }}"
# 数据保留月数(按自然月清理分区)
# 数据保留月数(按自然月清理分区;operations 表)
- name: AUDIT_RETENTION_MONTHS
value: "{{ .Values.audit.retentionMonths | default 6 }}"
# 错误流水独立保留月数(errors 表,分表独立清除)
- name: AUDIT_ERROR_RETENTION_MONTHS
value: "{{ .Values.audit.errorRetentionMonths | default 3 }}"
# MQTT broker
- name: AUDIT_MQTT_BROKER_URL
value: "mqtt://{{ .Values.audit.mqtt.brokerHost }}:{{ .Values.audit.mqtt.brokerPort }}"
+3 -1
View File
@@ -24,8 +24,10 @@ audit:
replicas: 2
database: audit-db
pgStorage: 5Gi
# 数据保留月数,按完整自然月清理分区(后端 AUDIT_RETENTION_MONTHS)
# 操作流水(audit_operations)保留月数,按完整自然月清理分区(后端 AUDIT_RETENTION_MONTHS)
retentionMonths: 6
# 错误流水(audit_errors)独立保留月数(后端 AUDIT_ERROR_RETENTION_MONTHS,2026-10-26 裁决:分表独立)
errorRetentionMonths: 3
# JWT 鉴权:后端通过 SSO /api/sso/users/info 间接校验 token,这里配置 SSO base URL
jwt:
ssoBaseUrl: "http://sso-service:8080"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-codeserver
description: MixingX code-server — 浏览器版 VS Code 测试 IDE,预装 GitLens/EditorConfig/Prettier/C#/OPC UA Browser 插件。
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-edge-unit
description: "One MixingX edge unit release with durable local revision storage."
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+21 -1
View File
@@ -14,5 +14,25 @@ helm upgrade --install mixingx-edge-workshop-a ./charts/mixingx-edge-unit \
--set site=workshop-a \
--set nodeName=edge-node-01 \
--set storage.className=longhorn \
--set tag=2026.07.02-abc1234
--set tag=2026.07.02-abc1234 \
--set adsRouter.localNetId=10.200.0.17.1.1 \
--set adsRouter.publicAddress=192.168.1.173
```
## ADS Router(本地 AMS Router)
每个 Edge 默认随包启用本地 ADS Router(`adsRouter.enabled: true`),身份只接受显式部署注入,
没有任何共享默认兜底:`enabled=true` 时 `adsRouter.localNetId` 与 `adsRouter.publicAddress`
必填,缺失/留空会使 helm 渲染(及 ArgoCD 同步)直接失败。NetId 显式分配、重启不变,
运行时绝不从 Pod IP 推导;同 AMS 通信范围内各实例 NetId 前 4 字节必须互异,建议 `.1.1` 结尾。
| Value | 缺省 | 说明 |
|---|---|---|
| `adsRouter.enabled` | `true` | `false` 时不注入任何 `Ads__Router__*` env,Edge 侧本地 Router 禁用(routerState=disabled) |
| `adsRouter.localNetId` | `""`(必填) | 本方固定 AMS NetId,如 `10.200.0.17.1.1` |
| `adsRouter.publicAddress` | `""`(必填) | 对外登记地址,PLC 回程拨入,原样写入登记报文 ComputerName |
| `adsRouter.clientEndPoint` | `""` | 可选;`ip:port`,留空不注入 env(应用缺省 `127.0.0.1:48898`,SDK 本地客户端入口=回环通道绑定端点) |
| `adsRouter.externalPort` | `48898` | 可选;外部 TCP 监听==远端拨号端口(SDK 同一字段不可分离);置 0 不注入 env |
注入 env:`Ads__Router__LocalNetId`、`Ads__Router__PublicAddress`(恒注入),
`Ads__Router__ClientEndPoint`、`Ads__Router__ExternalPort`(仅值非空时注入)。
@@ -3,6 +3,10 @@
{{- $serviceId := include "mixingx-unit.serviceId" . -}}
{{- $basePath := include "mixingx-unit.basePath" . -}}
{{- $brokerSvcName := include "mixingx-unit.mqttBrokerServiceName" . -}}
{{- /* ADS Router 身份强制:启用即必须显式给身份,禁止共享默认兜底(空/缺失=渲染失败)。 */ -}}
{{- if and .Values.adsRouter.enabled (or (not .Values.adsRouter.localNetId) (not .Values.adsRouter.publicAddress)) }}
{{- fail "adsRouter.enabled=true requires explicit adsRouter.localNetId and adsRouter.publicAddress (no shared default identity)" }}
{{- end }}
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
@@ -87,6 +91,21 @@ spec:
value: {{ required "idWorkerId is required for an Edge unit" .Values.idWorkerId | quote }}
- name: EdgeSecrets__Root
value: {{ .Values.edgeSecrets.root | quote }}
{{- /* ADS Router 身份注入:必填两项恒注入;可选两项留空/置 0 则省略(应用侧缺省生效)。 */ -}}
{{- if .Values.adsRouter.enabled }}
- name: Ads__Router__LocalNetId
value: {{ .Values.adsRouter.localNetId | quote }}
- name: Ads__Router__PublicAddress
value: {{ .Values.adsRouter.publicAddress | quote }}
{{- with .Values.adsRouter.clientEndPoint }}
- name: Ads__Router__ClientEndPoint
value: {{ . | quote }}
{{- end }}
{{- with .Values.adsRouter.externalPort }}
- name: Ads__Router__ExternalPort
value: "{{ . }}"
{{- end }}
{{- end }}
volumeMounts:
- name: edge-data
mountPath: /var/lib/mixingx-edge
@@ -41,6 +41,16 @@ edgeSecrets:
nodeName: ""
nodeSelector: {}
# ADS Router 本地路由身份(契约 docs/research/2026-10-10-ads-router-impl/CONTRACT.md §2.1):
# 身份只接受显式部署注入,重启保持,运行时绝不从 Pod IP 推导,无共享默认兜底。
# enabled=true 时 localNetId/publicAddress 必填,缺失或留空 → helm 渲染明确失败(fail)。
adsRouter:
enabled: true
localNetId: "" # 本方固定 AMS NetId,如 "10.200.0.17.1.1";同 AMS 通信范围前 4 字节互异,建议 .1.1 结尾
publicAddress: "" # 对外登记地址(PLC 回程拨入的地址串,原样入登记报文 ComputerName)
clientEndPoint: "" # 可选;"ip:port",缺省 127.0.0.1:48898(SDK 本地客户端入口=回环通道绑定端点),留空不注入 env
externalPort: 48898 # 可选;外部 TCP 监听==远端拨号端口(SDK 同一字段不可分离),置 0 不注入 env
# Audit 事件发布(ADR-0048/0049):指向中心 Audit Broker。
# enabled=false 时服务内 AuditMqttPublisher 退化为 NoOp,不发审计事件。
# instanceId/nodeId 默认取单元名(role-site,如 edge-demo)。
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-gateway
description: MixingX gateway service, RBAC, and root ingress.
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-infra
description: MixingX shared infrastructure services (Redis, MongoDB, RabbitMQ).
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-mqttx
description: MixingX MQTTX Web — 浏览器端 MQTT 客户端,用于监控/调试各 Edge 的 NanoMQ broker。
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-network-agent
description: "MixingX network console agent: 每节点常驻,提供主机网口(IP/掩码/网关/DNS)与 WiFi 的可视化配置 API。"
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-platform
description: MixingX central platform services without customer edge/agent instances.
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -231,6 +231,11 @@ spec:
labels:
app.kubernetes.io/component: {{ .name }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-platform.tierAffinity" (dict "role" .tierRole "root" $root) | nindent 6 }}
{{- with $root.Values.imagePullSecrets }}
imagePullSecrets:
@@ -240,6 +245,10 @@ spec:
- name: postgres
image: {{ $root.Values.sharedInfra.postgres.image | default "docker.io/library/postgres:17" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ $root.Values.sharedInfra.postgres.password }}"
@@ -253,6 +262,15 @@ spec:
- name: tcp
containerPort: {{ $root.Values.sharedInfra.postgres.port }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ $root.Values.sharedInfra.postgres.port }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data
@@ -213,6 +213,11 @@ spec:
labels:
app.kubernetes.io/component: {{ .Values.audit.database }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-platform.tierAffinity" (dict "role" "audit" "root" $root) | nindent 6 }}
{{- with $.Values.imagePullSecrets }}
imagePullSecrets:
@@ -222,6 +227,10 @@ spec:
- name: postgres
image: {{ $root.Values.sharedInfra.postgres.image | default "docker.io/library/postgres:17" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ $root.Values.sharedInfra.postgres.password }}"
@@ -235,6 +244,15 @@ spec:
- name: tcp
containerPort: {{ $root.Values.sharedInfra.postgres.port }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ $root.Values.sharedInfra.postgres.port }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-protocol-server-unit
description: Deploy one MixingX edge protocol test server instance.
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-sso
description: MixingX SSO standalone release (backend, web, and PostgreSQL).
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -197,6 +197,11 @@ spec:
labels:
app.kubernetes.io/component: {{ $name }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-sso.tierAffinity" (dict "role" $role "root" $root) | nindent 6 }}
{{- with $.Values.imagePullSecrets }}
imagePullSecrets:
@@ -206,6 +211,10 @@ spec:
- name: postgres
image: {{ $root.Values.sharedInfra.postgres.image | default "docker.io/library/postgres:17" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ $root.Values.sharedInfra.postgres.password }}"
@@ -219,6 +228,15 @@ spec:
- name: tcp
containerPort: {{ $root.Values.sharedInfra.postgres.port }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ $root.Values.sharedInfra.postgres.port }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data
+2 -2
View File
@@ -2,5 +2,5 @@ apiVersion: v2
name: mixingx-ultra
description: "MixingX Ultra dashboard standalone release: ultra backend, ultra web, and ultra PostgreSQL."
type: application
version: 1.0.59
appVersion: "1.0.59"
version: 1.0.91
appVersion: "1.0.91"
@@ -200,6 +200,11 @@ spec:
labels:
app.kubernetes.io/component: {{ $name }}-postgres
spec:
securityContext:
# Run the image entrypoint as postgres so it does not invoke gosu.
runAsUser: 999
runAsGroup: 999
fsGroup: 999
{{ include "mixingx-ultra.tierAffinity" (dict "role" $role "root" $root) | nindent 6 }}
{{- with $.Values.imagePullSecrets }}
imagePullSecrets:
@@ -209,6 +214,10 @@ spec:
- name: postgres
image: {{ $root.Values.sharedInfra.postgres.image | default "docker.io/library/postgres:17" }}
imagePullPolicy: IfNotPresent
command: ["docker-entrypoint.sh", "postgres"]
securityContext:
# Temporary compatibility workaround for checkpoint signal failures on affected k3s nodes.
privileged: true
env:
- name: POSTGRES_PASSWORD
value: "{{ $root.Values.sharedInfra.postgres.password }}"
@@ -222,6 +231,15 @@ spec:
- name: tcp
containerPort: {{ $root.Values.sharedInfra.postgres.port }}
protocol: TCP
readinessProbe:
exec:
command:
- sh
- -ec
- >-
exec pg_isready -q -h 127.0.0.1 -p {{ $root.Values.sharedInfra.postgres.port }} -U "$POSTGRES_USER" -d "$POSTGRES_DB"
periodSeconds: 5
timeoutSeconds: 3
volumeMounts:
- name: data
mountPath: /var/lib/postgresql/data